audi gear IE VW/AUDI DSG (DQ250) Transmission Tune
SKU: 2497296698
audi gear

audi gear IE VW/AUDI DSG (DQ250) Transmission Tune

Sale price$20.17 Regular price$22.41
Save 10%

Pay in installments of $5.60 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

audi gear IE VW/AUDI DSG (DQ250) Transmission TuneSHIFT FASTER, DRIVE FASTER The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2. 0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2. 0T TSI into a fully rounded performance monster. LEADING FEATURES Lightning fast gear shifts Higher

SHIFT FASTER, DRIVE FASTER

The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2.0T TSI into a fully rounded performance monster. 

LEADING FEATURES

  • Lightning-fast gear shifts
  • Higher shift points of 6800 RPM
  • Kick down in manual mode eliminated
  • Lag time is reduced when starting off in first gear
  • Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000
  • Drive shift mapping entirely reworked with an enthusiast in mind
  • Flashed directly through OBD-II Port (No TCU removal required)
  • Works flawlessly with an IE ECU tune
  • Increased clutch pressure on tap for higher torque without slip
  • Temperature protection remains for safety
  • Gear hunting reduced
  • Gearbox “Torque Limiters” removed

WHAT DOES A DSG TRANSMISSION TUNE DO?

The IE DSG Tune for the MK6 2.0T TSI has been carefully set up to make the car way more fun to drive. It completely reworks the shift point mapping in both drive and sport. The transmission will no longer lug the engine in drive mode. Clutch clamping forces are increased so the transmission can safely handle much more power. Shifts are much, much faster taking time directly off the 0-60 and ¼ mile times.  

ONE TUNE FOR ALL STAGES

IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added to the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. 

USER-ADJUSTABLE LAUNCH CONTROL

The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

Available Launch Control RPMs:

  • 3200 RPM
  • 3400 RPM
  • 3600 RPM
  • 3800 RPM
  • 4000 RPM

Note: Vehicle must have launch control stock, this will not add launch control features to models not equipped with LC from the factory.

IE DSG TUNE TECHNICAL FEATURES

HIGHER SHIFT POINTS
Utilize the whole powerband of your 2.0 TSI engine without the DSG interfering and shifting early.

DRIVE MAPPING REWORKED
The MK6 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping that shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.

INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.

FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cable means you can install updates are they become available as well as read TCU and ECU fault codes.

TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.

MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE
The kick-down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain

FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI engine and transmission.

VEHICLE FITMENT

  • VW - MK6 GTI 2010-2014 (MK6) 2.0T EA888 Gen1/2 TSI engines
  • VW - MK6 Jetta 2011-2013.5 (MK6) 2.0T EA888 Gen1/2 TSI engines*
  • VW - MK6 GLI 2011-2013.5 (MK6) 2.0T EA888 Gen 1/2 TSI engines*
  • AUDI - TTS 2008-2015 (8J) 2.0T TFSI EA113 engines

*Does not function on MK5 generation vehicles.

*This DSG calibration is for 2.0T TSI EA888 Gen 1 & 2 engines only. Many Jetta and GLI models are equipped with a new engine variation (EA888 Gen 3) after 2013.5 and later.  This tune does NOT support Gen 3 model engine TCUs. Please verify if your engine is an EA888 Gen 1/2 2.0T TSI or EA888 Gen 3 2.0T TSI tune before ordering. 

IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.

Once a tune purchase is applied to your vehicle's ECU, the tune is permanently registered to the vehicle and non-transferable to other vehicles. The tune can be transferred to a second party in the event of vehicle transfer of ownership only.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 2497296698

Discover Niche Categories That Outsell audi gear

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 2260 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Cindy
Omaha, US
★★★★★ 5
Oxidized fiberglass RV looks new again!
WOW! I researched high and low for a product that would bring back the shine to our 10 year old travel trailer that has fiberglass panel siding. There were countless videos watched, numerous products tried without success and then I discovered PoliGlow Restoration Fiberglass Kit for boats and RVs. It came with the cleaner and pad to remove the oxidation and a bottle of Superior Fiberglass Restoration, Protection and Shine. This product is amazing. The condition on the exterior of our RV had become a bit embarrassing, but now it shines with the newest of them. The instructions are easy to follow, there are even videos of the process! It does require several coats of the Restoration and Shine product. The cost is extremely reasonable for the end result of the RV. The shine is amazing! Highly recommend this product. PS It was extremely easy to apply as I had my husband do it, he didn’t complain at all and was thrilled with the result!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 24, 2025
C
Verified Purchase
CV S.
Carnegie, US
★★★★★ 5
Wow this stuff works!!
Wow. What an amazing product. I own a 1976 Bertram 42 aft cabin motor yacht. The previous owner had not waxed it in a good long time. I spent a weekend with four friends sweating and laboring using the traditional wet sanding, buffing, and waxing it's heavily oxidized finish. One of the friends helping was a former professional boat detailer. The results were ok. The wax job lasted about six months before it looked like crap. There's a lot of controversy over Poli Glow. A number of the old fellows who sit around drinking coffee in the marina clubhouse swear that nothing should go on a boat except the most expensive and laborious traditional wax, preferably applied by a crew of of professionals. They universally ranted about the failings of Poli Glow despite having no practical experience. They also talk more than they actually boat, so I didn't listen to them. I was cautious, and started with my heavily oxidized flybridge. I wanted to work my way top to bottom and I figured if I hated the look, I could stop and it wouldn't really noticeable. It was easy to use. I bought the complete kit. Mixed the prep. Sprayed and scrubbed. Wow that stuff gets things clean and even. I wiped the Poli Glow on with the provided mitt. Tip: really, you needs to let each coat dry before applying the next. It was noticeable alright. From the dock you can now see an actual reflection of my antennae in the now shiny Fiberglas. It's amazing. I did find that the more oxidized portions were thirsty as heck and took a lot of coats. The results are worth it. Application is way less laborious than buffing and waxing. If you can wipe clean a countertop in your kitchen or galley you can Poli Glow like a pro. It's that stupidly easy. Where the gel coat was reasonably smooth the product built a mirror finish. I didn't even put her on the hard. I applied it while it was docked. I couldn't have five that with a buffer. My pro detailer friend was totally surprised at the result. Bottom line: if you have an older sad looking boat this stuff can make it shiny and happy with minimal labor. Good stuff well worth the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 29, 2017
P
Verified Purchase
pdb
Lexington, US
★★★★★ 4
Overall great product, especially on solid colours.
I bought a 33 year old boat that is mostly white gelcoat. Some of the white had yellowed in areas and there were bright spots where I removed stickers and hull numbers. The boat also has red and blue metal flake that was quite faded and gritty. The flake is large particles of metal or paint or whatever, not fine little glitter bits like they do now. I called Poli Glow Canada and the guy told me to use 600 grit wet sandpaper to smooth out the metal flake and then wash with the Poli Prep. The white came up pretty clean, but I had to use the sandpaper on some areas to take off the yellow. The Poli Glow went on really easily and quickly. When you are doing it, keep an eye on the the edges of the applicator. If the liquid starts to harden, wash the edges in warm water to get them soft again. I didn't do this and have some small bumps kind of like fuzz off a paint roller, which I guess is bits of dried liquid that came off the applicator. You will also get streaks if the edges are dry, but the next coat fixes that right away. Check after each coat to ensure it is smooth. I'm pretty sure a quick pass with the sandpaper would have removed the bumps, but by the time I was finished, I didn't want to mess with it. In the end, the white turned out looking great. The flake is definitely better than when I bought it, but it only shines at about 50% of original (compared to the flake on the transom which was in really good condition) and I was expecting better based on the before and after shots on their site. There are also some streaks in the flake from certain angles where I guess my sanding pressure wasn't consistent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2013
T
Verified Purchase
The skinny...
Natrona Heights, US
★★★★★ 5
I am hard to please...especially expensive products...
K...So I have this 26 ft. sailboat. I have all the professional equipment you can use to restore fiberglass shine. However, a 15 year old sailboat's topside will usually have pitting that you COULD sand down and shine.. but this is a risky step as you think the gelcoat and if you go through, now you have an eyesore of an entirely different nature... My only problem with trying this was the idea that it would fade out shortly and possibly yellow. However, a bigger concern is continued breakdown of the glass surface. An over-riding concern. Wax on a surface that is pitted is usually short lasting and does shine well..good for 3 months, maybe. I bit the bullet and bought this after looking at it's competitors. BUY THE KIT, NOT JUST THE POLIGLOW. The cleaner worked better than any other I have bought. I don't know why. It just did. The scrubbing sponge is perfect for the job. I used a smaller dishwashing scrubber in tight spaces..it seriously was inadequate. This kit was made right, I'm thinking. Following the directions to apply per the bottle. I was skeptical about using a damp mit. I have done the entire cockpit area of the boat at this point with 6 coats and used maybe a half an inch of the product. And the boat looks absolutely AMAZING. Will this yellow? Will it last a year? IDK, but other reviews suggest positive experiences on both counts. Best of all, this will HALT the ongoing beating the topsides takes. (On another note, don't use this on nonskid. It's slick..just my opinion, maybe no more slick than new nonskid. But there is a really great product if you search "nonskid fiberglass surface restorer." Expensive but works.) Best description I can give you on how this will turn out is .. you know how good a surface that is aged looks when you wet it? That..but it stays. Yes, you will need 4-6 coats. But it dries very quickly and still doesn't use much product. At this performance level, the price was worth it. And I am frugal beyond belief. I would recommend that you do professionally buff any fiberglass surface with a good medium one step cutting compound and a professional buffer before you apply this to get best results. DO NOT USE THIS ON SURFACES THAT ALREADY ARE SHINY. It says so right on the kit. I also agree your smoothest outcome will come at room temp vs applying int the sun or significant heat. It dries quickly and doesn't even out as well before drying. Still, it will look great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2016
J
Verified Purchase
Jake D.
Lowell, US
★★★★★ 5
YOU WILL LOVE IT!!!
This is the best product I’ve ever used on our boat! We have a 26-year-old Tige wakeboard boat that had heavy oxidation and water spots. In addition to a heavily faded gel coat. I spent a few hours working on it and it completely restored our boat! I got the recommendation from my father in law after he used it on his RV. The results speak for themselves. I highly recommend this product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026

recommand products